A Detailed List Of The Materials You Will Need When Undertaking A DIY Decking Project

The only way to ensure that you complete your upcoming DIY deck installation without a hitch is to first acquire all the materials and supplies you for the entire project. Below, we have subdivided the deck installation process into two stages and provided a comprehensive list of the materials you will need at each stage.

1. Installing Posts & Framing

The supplies that you will need to put up posts and for framing include:

• Properly mixed concrete
• 2 anchor bolts (Each post footing will require an anchor bolt)
• 2 cardboard post forms (Each post footing should have one cardboard post form)
• A ledger board
• Four pieces of 2×4 boards
• Lag screws
• Nails
• Joist hangers
• Two 4×4 posts (Each footing should have a post)
• A center beam
• Joist lumber that meets the building code requirements in your locality
• A mason’s string
• Joist hangers
• Several wooden stakes
• At your discretion, you can acquire landscaping fabric
• Depending on your preferences, you can also acquire gravel

2. Installing a Composite Deck, Fascia, and Fixing End Caps

To property install the components and parts listed above, you will need the materials listed below.

• Boards for the composite deck
• A hidden fastening system or screws to secure the deck
• White Chalk – Note that for a composite deck, it is recommended that you only use a white chalk. Any other chalk color can stain your deck and lower its aesthetic appeal.
• Any additional accessories you want to add the start and end of the deck
• Fascia boards
• End caps (To be used for a hollow composite deck)
• A water-based or silicone-based sealant

Tools Needed To Build a DIY Deck

Apart from the materials listed above, you will also need to arm yourself with a variety of tools for the decking project as shown below.

1. Tools Need For Post Installation and Framing

At this stage of the deck installation process, the tools you will need include:

• A circular saw
• A blade
• A water level or laser
• An electric drill
• A mallet and hammer
• A handsaw
• A concrete float
• A shovel
• A trowel
• Tape measure
• Something to manually dig post holes

2. Tools You Will Need To Properly Install a Composite Deck, Fascia Boards, and End Caps

The tools you will you for this process include:

• A framing square
• A speed square
• A miter saw
• A rubber mallet
• A hammer
• Clamps
• A small brush
• A plunge router

Call UglyDeck today at 952-736-3308 or visit our online store at https://uglydeck.com/store/